Custom-developed and manufactured in the USA, the 10-inch Ultra tonearm uses smooth, high-quality ball bearings for low friction in the vertical and horizontal plane so all you hear is what is in the grooves. Cardas Audio wiring maintains signal purity from the headshell leads all the way through to the high-quality, gold-plated RCA connectors.
Our stepped-pulley AC motor provides excellent speed stability for pitch accuracy and rhythmic drive. The Delrin® pulley has two positions for 33 1/3 and 45 RPM speed selection. Motor vibrations are kept away from the platter and stylus by using advanced dampening materials that decouple the motor from the rest of the turntable.
Any vibration of the stylus that is not created by the grooves in the record is a distortion that will mask musical detail. Developed in conjunction with the engineering team at Harmonic Resolution Systems, the world leader in vibration isolation for audio equipment, the included MoFi anti-vibration feet isolate your turntable from bad vibrations.
UltraDeck features a massive 1.3-inch Delrin® platter. The increased mass creates blacker sonic backgrounds and a lower noise floor. Delrin® is a next-generation polymer developed by Dupont. In the world of audio, Delrin’s® highly crystalline structure presents a wonderful impedance match to vinyl records, effectively grounding unwanted noise and keeping it away from the stylus.
Our hardened stainless steel inverted bearing system is designed for smooth, quiet rotational stability. The extremely low tolerance combination of steel, bronze, and sapphire—found in much more expensive turntables—will provide you many years of high-performance playback.
The well-damped billet aluminum body controls resonances for tight, accurate bass reproduction. MasterTracker has the lightest-weight magnets in the Tracker Series, delivering the kind of detailed, open performance normally attributed to high-end moving-coil cartridges.
By using a Micro-Line diamond stylus shaped like the cutting head of a record lathe, MasterTracker traces vinyl groove walls with microscopic precision.
Fender x Mofi Precisiondeck Turntable Highlights
Individually Badged and Numbered
An instant collector’s item limited to only 1,000 units, PrecisionDeck comes individually numbered and badged, distinguished with a nameplate, not unlike the metal serial-number plates found on Fender guitars.
Isolated AC Synchronous Motor
Our stepped-pulley AC motor provides excellent speed stability for pitch accuracy and rhythmic drive. The Delrin® pulley has two positions for 33 1/3 and 45 RPM speed selection. Motor vibrations are kept away from the platter and stylus by using advanced dampening materials that decouple the motor from the rest of the turntable.
Iconic Tricolor Sunburst Finish
Developed by Fender in the 1950s, the same tricolor sunburst pattern famously found on Precision Bass, Stratocaster, and Telecaster guitars graces PrecisionDeck, each of which is carefully hand-painted by Fender. Prized by guitar collectors and known for its soft warmth, the special urethane finish ages extremely well and lends to exceptional durability.
Anti-Vibration Feet By Harmonic Resolution Systems
Any vibration of the stylus that is not created by the grooves in the record is a distortion that will mask musical detail. Developed in conjunction with the engineering team at Harmonic Resolution Systems, the world leader in vibration isolation for audio equipment, the included MoFi anti-vibration feet isolate your turntable from bad vibrations.
1.3-Inch Delrin® Platter
PrecisionDeck features a massive 1.3-inch Delrin® platter. The increased mass creates blacker sonic backgrounds and a lower noise floor. Delrin® is a next-generation polymer developed by Dupont. In the world of audio, Delrin’s® highly crystalline structure presents a wonderful impedance match to vinyl records, effectively grounding unwanted noise and keeping it away from the stylus.
Hardened-Steel Inverted Bearing
Our hardened-steel inverted bearing system is designed for smooth, quiet rotational stability. The extremely low tolerance combination of steel, bronze, and sapphire—found in much more expensive turntables—will provide you many years of high-performance playback.
Fender x Mofi Precisiondeck Turntable Features
- Ash plinth by Fender® optimized for low resonance
- 33-1/3 / 45.0 RPM belt-drive turntable
- Custom designed and manufactured in the USA
- 10-inch MoFi® Ultra Tonearm
- 1.3-inch Delrin® platter
- Isolated 300 RPM AC synchronous motor
- Anti-Vibration feet designed by HRS
- Iconic 3-Color Sunburst Finish by Fender®
MasterTracker Cartridge
- V-Twin dual-magnet generator
- Micro-Line stylus and tapered cantilever
- Well-damped billet aluminum body
- Ohno continuous cast copper coils
- 3mV output
The Fender x Mofi Precisiondeck Turntable retails for $3,495.00. Click for more information.
